Daiwa Saltiga LD 35 JP Lever Drag Overhead Game Fishing Reel
Introducing the brand new 20 Saltiga Lever Drag (LD), crafted from the ground up to meet the demands of hardcore saltwater anglers around the world.
Over half a decade in the making, Saltiga LD combines everything learnt from across the globe. From the USA, South Africa, New Zealand & Australia, every bit of feedback and learning has been absorbed and rolled into what can only be described as Daiwa’s best lever drag reel ever made.
It all starts with the precisely machined one-piece aluminium body and side plates. This rigid housing holds what sets Saltiga LD apart from the competition – a meticulously crafted drive gear & pinion gear made from insanely durable Stainless Steel. Stainless Steel gears are harder than brass and much more resistant to the harsh saltwater fields in which this reel will be used. Stainless Steel gearing is often criticised for lacking smoothness, but Daiwa engineers have overcome this, producing a gear set that is refined and smooth, yet more powerful & durable than anything else on the market.
Saltiga LD has had improvements in all areas of the reel, addressing areas of concern that top anglers identified with lever drag reels of the past. A drag cam design that is smooth and capable of handling both braid and monofilament lines is one of the obvious improvements. The lever itself has been totally redesigned to allow finite and precise drag control even at very low settings, a feature loved by livebait anglers especially. 20 Saltiga LD was designed to be beautifully simple, and incredibly strong. Available in single- and two-speed designs from size 10-60.
Daiwa’s Automatic Tournament Drag uses an improved drag grease that exhibits a low viscosity at rest, yet becomes more viscous immediately after drag start up. This reduces initial drag start-up inertia and combined with the structural changes of the ATD Drag System results in a smoother drag from the initial hook up.
A lever control system that allows drag pressure to be easily applied by pushing the lever forward. Allows for increased pressure to applied, and is ideal for jigging and deep water angling.
Lightweight and incredibly strong, Machine Cut Alloy provides body strength and reduced weight to be achieved without the cost and corrosion issues of other metals.
Harder & stronger than any other material, Stainless Steel significantly increases gear longevity. Unmatched against corrosion, Stainless Steel gears will help fight against pitting and premature wear which can lead to increased feedback.
|Model||Ratio||Weight||Bearings||Drag||Capacity (braid)||Capacity (mono)||Handle||SKU|
|LD10H||6.3||445g||6 CRBB; 1RB||12kg||20lb-330m||12/270, 14/220||Soft Touch||26194|
|LD15H||6.3||480g||6 CRBB; 1RB||12kg||30lb-330m||12/310, 14/270||Soft Touch||26196|
|LD20H||6.3||495g||6 CRBB; 1RB||12kg||40lb-300m||14/350, 20/210||Soft Touch||26199|
|LD35-2SPD||5.8/3.1||700g||6 CRBB||18kg||65lb-330m||20/300, 25/240||Soft Touch||26203|
|LD35JH||6.3||590g||6 CRBB; 1RB||18kg||40lb-330m||–||Aluminum T-Bar||26205|
|LD35JP||5.1||590g||6 CRBB; 1RB||18kg||40lb-330m||–||Aluminum T-Bar||26206|
|LD40-2SPD||5.8/3.1||745g||6 CRBB||18kg||65lb-480m||25/400, 30/270||Soft Touch||26208|
|LD50-2SPD||5.8/3.1||845g||6 CRBB||18kg||80lb-460m||20/660, 30/440||Aluminum T-Bar||26211|
|LD55-2SPD||5.2/2.3||1050g||6 CRBB||20kg||80lb-550m||30/440, 40/340||Aluminum T-Bar||26213|
|LD55JP||5.2||890g||6 CRBB; 1RB||20kg||65lb-440m||–||Aluminum T-Bar||26214|
|LD60-2SPD||5.2/2.3||1090g||6 CRBB||20kg||100lb-550m||30/550, 40/420||Aluminum T-Bar||26216|
There are no reviews yet.