Deep Water PE4-5 Snapper and Dimersal Bait Fishing Electric Combo
This combo is not a bent butt combo for sticking in the holder, this combo is for those who have trouble or just would rather not hand wind baits from deep water with big snapper leads or bring up large jigs all day. This combo is as light weight as you will get for an electric combo, and is perfect for deep water Snapper, Perch and all other Dimersal Species that live on the bottom in deep water and will still handle Kingfish without an issue. The reel is the Tanacom 500 and it is a bullet proof little reel that is very well priced. The Tanacom 500 will take 550m of PE4 meaning you will be able to fish a wide range of depths. The rod is the Demon Blood PE4-6 so is not overly heavy and still has a bit of softness in the tip. You may also request the PE 2-3 if you want it for fishing the shallower range of depths for smaller Dimersal Species. We use J Braid X8 Multi Colour Braid 40lb. J braid X8 is a thin, smooth and round line that is perfect for deep water.
THIS COMBO INCLUDES
- Daiwa Tanacom 500 Electric Reel
- Daiwa Demon Blood B58-4/6 Overhead Rod
- Daiwa J Braid X8 40lb Multi 550m
DAIWA 21 DEMON BLOOD OVERHEAD FISHING ROD
Daiwa’s Demon Blood range has been synonymous with the tough and often brutal fishing which Australia is so famous for. In 2021, Daiwa has redeveloped the Demon Blood to bring a new level of performance and expanded the range to cater for the ever-growing demand for sportfishing actions suitable for casting, or jigging for hard-fighting predators.
The first thing you’ll notice about the new Demon Blood is the return of the distinctive red colour. A throwback to the original series, the red area not only looks fantastic but signifies the section of the blank where Daiwa has included 3DX carbon. 3DX is Daiwa’s exclusive carbon technology which creates an interlocking weave of high-modulus carbon fibre which significantly increases torsional stiffness, reducing twisting and ultimately leading to longer casts and more consistent performance. The upgrades don’t stop there either, Daiwa’s new X45X Full Shield has been incorporated from where the 3DX finishes, throughout the entire rod blank. The next iteration from Daiwa’s famous X45, X45X Full Shield is up to 25% more efficient in its benefits of increased torsional stiffness and increased stiffness to weight ratio. That means the new Demon Bloods not only are lighter than their predecessors but will outperform them as well.
Fuji components outfit the new blanks with Alconite ringed stainless-steel guides and DPS reel seats with locking nuts across the range. A few key points of the new Demon Blood are the use of reversed MN frame guides as stripper guides across the series. By reversing an MN frame Fuji guide, line slap across the frame is significantly decreased resulting in longer casts and less tangles. Daiwa then combines this reverse stripper with ‘K’ series anti-tangle guides towards the tip sections of the rods where the line has been brought under control by the stripper guides and line slap on the angled frame of the ‘K’ series guides is a non-issue. This is the preferred guide method for heavy tackle casting and has become the standard across the Daiwa range.
The all-new range of Demon Blood rods has been expanded to cater for the growing demand of lure casting to pelagic species such as mackeral, GT, tuna and Kingfish with actions covering every conceivable requirement from all around the country.
If you’re looking for a new outfit to tame some monsters from the deep or maybe chase some addictive topwater action on the reef, look no further than the brand new, redeveloped range of Demon Blood rods from Daiwa.
X45X Full Shield Technology is 25% more efficient than standard X45 technology. With increased torsional stiffness, blanks armed with X45X resist blank twist during casting & jigging. This characteristic prevents the blank from losing stored energy during the cast, ensuring that every bit of force you put into your cast, is transferred through the blank and ultimately to your chosen lure.
3DX supports the lower power section of the rod by knitting densely packed carbon fibers in 3 directions to achieve a six wrap rectangular weave. Power through the blank under load is distributed evenly in all directions allowing it to maintain its profile and form. This process confines the rod’s power to the lower section of the rod, increases power, eliminates blank twist and collapse, all the while reducing angler fatigue.
through the use of nano resin control technology in the blank construction process, Nanoplus allows for increased graphite density to be achieved within a graphite rod blank.
Bias construction within the ferrule allows it to flex with the rod, eliminating the weak, unbending spot caused by ordinary ferrules. The result of this revolutionary technology is a multi-piece blank that matches the performance of one-piece blanks in flex, power and responsiveness.
DAIWA TANACOM 500 ELECTRIC REEL
Few dendoh reels have the refinement and reputation of Tanacom. The benchmark in performance, price and quality, this outstanding reel welcomes a new member to the range, with a compact 500 size making it lighter, easier, and less expensive than ever to enjoy the benefits of a quality dendoh electric reel.
Small in size yet big in design, this sleek offering boasts a powerful, high performance electric system. Featuring an impressive 15kg of continuous winding power and a programmable jigging function, JOG Power Lever, for instant control of winding speed and power. Combine this with a digital readout which displays the line released, distance retrieved from the bottom, and lure/bait depth in the water column, the Tanacom 500 is one of the most exciting reels to be released in many years.